Fix Four Common Pad Printing Pad Defects
author: Lulu
2026-09-21
Bubbles in the pad usually mean fast stirring or skipped degassing. Stir slowly and vacuum for three minutes.
Tearing after a few uses points to excess cure agent. Keep the ratio at 100 to 2 to 3. Deformation comes from a tilted mold. Level it before pouring and rest the pad flat after demolding. Blurred print often means wrong hardness. Use a softer pad like HY-916 for fine curved graphics. Most defects are process problems, not material grade problems. Review your technique first.
Pressure-Resistant Gel Potting for Oceanographic Instruments and Underwater Sensors
Professional Platinum Cure Silicone Supplier Which to Trust 2026
Related Article
Craft sculpture mold silicone, sculpture casting silicone, RTV-2 liquid mold silicone rubber, cultural craft duplication silicone, low shrinkage mold silicone
Craft Sculpture Mold Silicone: High-detail Duplication Material Empowers Mass Production Upgrading of Sculpture & Cultural and Creative Industry
How to choose pad printing silicone model? Compare HY-901 HY-902 HY-912 HY-916 four models by hardness, tear strength and elongation, choose right silicone for your product.
Pad Printing Silicone Selection Guide Hongye Silicone Four Models
Platinum-cured medical LSR with ultra-low extractables provides safe, skin-friendly sealing for long-wear continuous health monitoring wearables.
Wearable Medical LSR Optimized for Continuous Health Monitoring Devices
Candle moulds reward a soft grade, clean release and a supplier who keeps batch samples. Compare curing chemistry, hardness in Shore A, documentation and trial terms before ordering, then cast a sample on your own master and compare the second and third pulls rather than the first.
Professional Candle Mold Silicone Supplier Which to Trust 2026