HY-E620 Addition Curing Platinum Silicone Rubber 20 Shore A for Resin and Cultural Stone Molds

This grade sits mid-range in HY-E: soft enough to copy relief, firm enough to hold an edge while the casting sets.

Product Overview

Buyers who run a mixed order book usually keep one general-purpose grade on the shelf. HY-E620 is that grade for shops working with resin, stone-effect pieces and decorative panels.

Technical Specifications

20 Shore A, two part addition cure, 1:1 or 10:1, translucent, -60C to 200C, packing 1 to 200kg.

Product Features and Advantages

Platinum cure forms no by-products, so the master can be reused. Each batch is sampled for traceability, and hardness spans 10 to 50 Shore A.

How to Use

Weigh both parts, mix two to three minutes, degas, pour from one corner in a thin stream, and leave it to set at room temperature.

Application Scenarios

Resin figurines, cultural stone, soap moulds, decorative panels, general reproduction work.

Buyer Benefits

A middle grade suits a mixed order book, cuts rework on edges and starts from a 10kg trial.

Certifications and Compliance

ISO 9001, RoHS, REACH, FDA, UL and CE documentation is available by model on request.

Customization Options

Hardness 10 to 50 Shore A, colour to order, packing to order.

Production Process and Quality Control

A sample is retained from each lot and the batch record kept; goods are inspected before dispatch.

FAQ

Export trial orders start at 10kg. Setting time varies with temperature and section thickness.