HY-E630 Addition Curing Platinum Silicone Rubber 30 Shore A for Resin and Stone Molds
Summary: HY-E630 is a 30 Shore A addition curing platinum silicone rubber for resin crafts and stone molds, with stable batch hardness and good detail reproduction.
Product Overview
Workshops running the same mold week after week care about one thing beyond hardness: whether the next drum behaves like the last. HY-E630 targets that pattern.
Technical Specifications
Model HY-E630, 30 Shore A, two parts A and B, mixing ratio 1:1 or 10:1, semi transparent, service temperature -60C to 200C.
Product Features
Addition cure leaves no by-products, so molds hold master dimensions. Tear strength carries angular relief, and flow reaches narrow channels unaided.
How to Use
Stir A and B separately, weigh by ratio, mix two to three minutes, degas, pour in a thin stream from one corner, cure at room temperature or with heat, then demould.
Application Scenarios
Resin craft molds, cultured and artificial stone, soap moulds, decorative plaster parts and general workshop tooling.
Buyer Benefits
Predictable hardness between batches, fewer rejects on repeat orders, trial quantities from 10kg.
Certifications and Compliance
ISO9001, RoHS, REACH, FDA, UL and CE.
Customization Options
Hardness, colour, mixing ratio and packaging can be customized.
Production Process
Pre-production sampling, batch mixing and full inspection before shipment.
FAQ
MOQ is 10kg. Curing time depends on temperature and thickness. Samples are available.
