HY-E635 Addition Curing Platinum Silicone Rubber 35 Shore A for GRC Panel Molds

Summary: HY-E635 is a 35 Shore A addition curing platinum silicone rubber for GRC panels, concrete parts and large decorative molds.

Product Overview

HY-E635 is a two component platinum cured silicone rubber. The 35 Shore A hardness provides firm support for large architectural parts while still releasing cleanly from fine surface detail.

Technical Specifications

Model HY-E635, 35 Shore A, two parts A and B, mixing ratio 1:1 or 10:1, semi transparent, service temperature -60C to 200C.

Product Features

Near-zero shrinkage, high tear and tensile strength, chemically inert, long mold life and good flow for deep relief.

How to Use

Stir A and B separately, weigh and mix by ratio, stir 2 to 3 minutes, vacuum degas, pour into the master mold, cure at room temperature or with heat, then demold.

Application Scenarios

GRC architectural decoration, concrete and plaster parts, large panels, artificial stone and sculpture replication.

Buyer Benefits

Stable dimensions on large parts, fewer rejects, trial orders from 2kg and flexible production for custom batches.

Certifications and Compliance

ISO9001, RoHS, REACH, FDA, UL and CE.

Customization Options

Hardness, color, mixing ratio and packaging can be customized.

Production Process

Pre-production sampling, 20 production lines and full inspection before shipment.

FAQ

MOQ is 2kg. Curing time depends on temperature. Samples are available.